In this guide, we are going to look at how to setup a Yealink phone with the Megacall service...
You first need to access the phone's web interface, the IP address for this can be different depending on the setup on your network.
Once in the phone web interface, you will need to go to the "Account" tab and then complete the following information:-
Label - This is for your own reference (in case you have more than one SIP account), here we have put Megacall
Display Name - Your internal PBX number from your personal account
Register Name - Your internal PBX number from your personal account
User Name - Your internal PBX number from your personal account
Password - Your internal PBX password from your personal account
Port - You will need to set this as 5060
Enabling Encryption
If you wish to enable encryption on your phone you can do so by following the below ins
1. Go to the Account tab > Register, in the SIP-server 1 Port field enter 5061
2. In the Advanced tab, set RTP encryption (SRTP) field to Compulsory.
If this option is unavailable, update your device firmware.
3. In the Extended settings, in the Connected to network tab Transportation field choose TLS
4. In the Security - Trusted Certificates in Only accept trusted certificates choose Disabled
5. Confirm settings
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article